Names and functions of each part are explained.

2.2.1 Front section (RJ-901C)

No.

Name

Function

Media loading lever

It is the lever for fixing or releasing the media.

Operation panel

Operation condition setting, plotter display and various function setting are performed.

Front cover

It is the cover for protecting user from coming in contact with the driving mechanism during the plotter operation. It is opened and closed during Razor blade replacement and paper jam. It is normally closed.

Waste fluid box

It is the box for collecting waste ink discharged from the plotter.

Option parts

No.

Name

Function

Stand

It is used when installing the plotter on leveled floor.

Media eject tray

It is a part of the stand. It holds the output media.

Book holder

Quick reference manual etc. can be stored here.

2.2.2 Front section (RJ-900C)

No.

Name

Function

Media loading lever

It is the lever for fixing or releasing the media.

Operation panel

Operation condition setting, plotter display and various function setting are performed.

Front cover

Waste fluid box

It is the box for collecting waste ink discharged from the plotter.

Stand

It is used when installing the plotter on leveled floor.

Media eject tray

It is a part of the stand. It holds the output media.

Book holder

Quick reference manual etc. can be stored here.

2.2.3 Rear section (RJ-901C)

No.

Name

Function

AC inlet

Power cable plug is correctly inserted in the socket.

Network interface connector

It is the connector which connects the network interface cable.

USB connector

It is the connector which connects the USB2.0/1.1 cable.

Scroller receiver

Scroller is set when using roll media.

Media feed slot

It is the slot for feeding media.

Ink cartridge slot

It houses the ink cartridge.

2.2.4 Rear section (RJ-900C)

No.

Name

Function

AC inlet

Power cable plug is correctly inserted in the socket.

Network interface connector

It is the connector which connects the network interface cable.

USB connector

It is the connector which connects the USB2.0/1.1 cable.

Scroller receiver

Scroller is set when using roll media.

Media feed slot

It is the slot for feeding media.

Ink cartridge slot

It houses the ink cartridge.

2.2.5 Operation panel

Operation panel is used during setup of operation conditions, plotter display and setup of various functions.
Names of each operation key and status display along with the functions are explained.

•

For details on the operation method of operation panel, refer to the followings.

•	When performing menu setting from operation panel: 4.5 Menu setup on the operation panel
•	When performing various operations in the operation panel: 4.6 Operating from the operation panel

(1) Operation keys

•	The operation keys are assigned with functions and names which change with Plotter status (Normal or Setup menu display). For details on plotter status, refer to "2.3 Plotter status".

No.

Name

Normal

Setup menu display

[Menu] key

Changes to Setup menu.

Shifts from Setup menu display to Normal.

[Enter] key

—

•	The menu to set is selected and it shifts to the next hierarchy.
•	The value is determined and saved.

[Cleaning] key

The plotter head will be cleaned, if this key is continuously pressed for two seconds or more.

—

[Cancel] key

•	During printing: Printing is forcefully terminated and one file of the remaining data is deleted.
•	During receiving/analysis: Data that is already received and analyzed is deleted and one file of subsequent receiving data is ignored.
•	Ink dry timer wait: Ink dry timer wait is canceled and the media is discharged.

•	Returns to the previous menu hierarchy. Change in the setup value becomes invalid.
•	Shifts from Setup menu display to Normal.

[Cut] key

Before data receiving when roll media is set, cut the roll media at that position.

—

[Back] key

Media type is set.

•	Lamp of media setup lights up (green).

Menu is changed to reverse feeding.

[Next] key

Printing and color mode are set.

•	The lamps of printing mode and color mode that is set light up (green).

Menu is changed to forward feed.

[Backward feed↑] key

Media is fed in reverse direction.

—

[Setting value +] key

—

•	The value is changed to forward direction.
•	The value is increased during numerical input.

[Forward feed↓] key

Media is fed in the forward direction.

—

[Setting value-] key

—

•	The value is changed to reverse direction.
•	The value is decreased during numerical input.

[Power] key

The plotter is turned on or off.

(2) Display section

No.

Name

Color

Status

Description

Power lamp

Green

Lamp ON

Power ON.

Lamp blinks

Lamp blinks An error has occurred. Error content is displayed on the LCD.

Lamp OFF

Power OFF.

Data lamp

Orange

Lamp ON

•	Analyzing received data.
•	Under printing.

Lamp blinks

Receiving data.

Lamp OFF

Data is not received/analyzed.

Roll media lamp

Green

Lamp ON

Media is set to roll media.

Lamp OFF

Media is set to sheet media.

Sheet media lamp

Green

Lamp ON

Media is set to sheet media.

Lamp OFF

Media is set to roll media.

Color lamp

Green

Lamp ON

Color mode is set to Color.

Lamp OFF

Color mode is set to Monochrome.

Black & white lamp

Green

Lamp ON

Color mode is set to Monochrome.

Lamp OFF

Color mode is set to Color.

High speed lamp

Green

Lamp ON

•	Printing mode is set as high speed.
•	When standard lamp is also turned on, printing mode is set as high quality.

Lamp OFF

Printing mode is set as standard.

Normal lamp

Green

Lamp ON

•	Printing mode is set as standard.
•	When the high speed lamp is also turned on, printing mode is set as high quality.

Lamp OFF

Printing mode is set as high speed.

LCD display section

—

Operation status of the plotter and error message are displayed.

•	When Error requiring a restart (fatal malfunction for the plotter operation) occurs, all lamps blink with alarm. Even if the malfunction is removed, when the error requiring a restart continues, contact MUTOH local dealer. 6.2.5 Error requiring a restart