| Error messages | Cause | Solution |
|---|---|---|
|
ERROR 04 PRAM ROM |
Parameter loading fails. | Turn OFF the power to the machine and turn it ON again after a while. If the same error message appears again,contact our service office or the distributor in your region. |
| 110 PCB KEY | The keyboard PCB is not available. | |
| 112 PCB CARTRIG | The cartridge PCB is not available | |
| 114 PCB PUMP | The pump PCB is not available | |
| 11b SLD FPC L | Slider PCB FPC Not LOW(0) | |
| 11c SLD FPC H | Slider PCB FPC Not HIGH(1) | |
| 11e PCB SLRLY | Slider junction PCB not available | |
| 131 PCB FPC-RELAY | FPC junction PCB undetectable | |
| 132 PCB TABLE | Table IO PCB undetectable | |
| 133 PCB STATION | Station PCB undetectable | |
| 134 PCB IO-EXT | Outside IO PCB undetectable | |
| 135 PCB HOTWT | Hot water control PCB undetectable | |
| 136 L-ZPCB | Z PCB (Left) undetectable | |
| 155 PCB-R-ZPCB | Z PCB (Right) undetectable | |
| 303 PCB MAIN ET | Control PCB trouble | |
| 304 USB INIT ERR | USB initialization error |