4.1 Print flow chart

The necessary procedure for printing with the plotter is shown in the following flow chart.
Refer to each section if necessary.
          1. Create print data.
          Create print data with application software.
↓
          2. Turn the power ON and set the media.
          graphics/nzilg007.gif3.3 Media handling
          graphics/nzilg007.gif4.2 Media
          graphics/nzilg007.gif4.3 Media eject tray setting
↓
          3. Printing setup conditions.
          graphics/nzilg007.gif4.4 Setting the plotter driver
          graphics/nzilg007.gif4.5 Menu setup on the operation panel
↓
          4.Perform the printing.
          graphics/nzilg007.gif4.6 Operating from the operation panel
•Do not open the front cover during printing. If the front cover is opened, printing will be interrupted.
When the front cover is closed, the plotter restarts printing, but high printing quality is not assured.