1.4 Operation procedure labels

Handling of operation procedure label, pasting location and types are explained.
When handling the operation procedure labels, be careful about the following points. The labels contain the matters with which the operator should be particularly careful while operating it.

1.4.1 Handling the operation procedure labels

Be careful about the following points, while handling with the operation procedure label.

•Check whether all operation procedure labels can be read. If the letters or illustrations on the label are not clear, remove the dirt from the label.
•Use cloth, water and neutral detergent for removing dirt from the operation procedure label. Avoid either organic solvents or gasoline.
•It is necessary to replace the labels if they are damaged, lost or illegible.
If the operation procedure labels have to be replaced, contact MUTOH local dealer.

1.4.2 Locations and types of warning labels

Pasting locations of the operation procedure labels are shown in the following figure.

graphics/RJ901CA102.gif
graphics/RJ901CA103.gif
No.
Types of operation procedure label
Reference
1
graphics/rj901ce105.gif
graphics/nzilg007.gif3.3.2 Loading roll media
2
graphics/rj901ce106.gif
graphics/nzilg007.gif 3.3.3 Loading sheet media
3
graphics/rj901ce107.gif
graphics/nzilg007.gif5.1.3 Replacing razor blade
4
graphics/RJ901CJ108.gif
graphics/nzilg007.gif5.1.1 Replacing ink cartridges