Handling of warning label, pasting location and types are explained.
Warning label is used on parts of the plotter which especially need caution. Understand the locations and the descriptions of the danger associated with each label before operating the plotter.

1.3.1 Handling the operation procedure labels

When handling the warning labels, be careful about the following points.

•	Check whether all the warning labels can be read. If the letters or illustrations on the label are not clear, remove the dirt from the label.
•	Use cloth, water and neutral detergent for removing dirt from the warning label. Avoid either organic solvents or gasoline.
•	It is necessary to replace the labels if they are damaged, lost or illegible. If the warning labels have to be replaced, contact MUTOH local dealer.

1.3.2 Locations and types of warning labels

Pasting locations of the warning label is shown in the following figure.

No.

Types of warning label