| Error messages | Cause | Solution |
|---|---|---|
| E70 FPGA | FPGA Configuration fails. | Turn OFF the power to the machine and turn it ON again after a while. If the same error message appears again,contact our service office or the distributor in your region. |
| E71 SD-RAM | Abnormal operation in SD-RAM. | |
| E75 I/F NONE | I/F board is not installed. | |
| E76 I/F INITIAL | Abnormal operation in I/F board. | |
| E77 I/F BOARD | An error occurred in the communication between the host PC and the I/F board. | |
| E78 HOST I/F | A time out error occurs in the communication between the host PC and the I/F board. | |
| E79 UHC NONE | UHC is not installed. | |
| E95 MODE SHIFT | Transition to the version up mode is not allowed. |